Steering and Front Axle Alpine A110

Our spare parts for the steering and front axle of your Alpine A110

Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Alpine A110

Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, silentbloc, stabilizer bar, support, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, direct steering kit, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old car back to life with quality components.

Read moreShow less

Home
>
Alpine
>
Alpine A110
>
Steering and Front Axle Alpine A110

Purchase a gift voucher

kit of 2 adjustable steering rods with bellows - 1

kit of 2 adjustable steering rods with bellows - 1

Kit of 2 adjustable steering rods (Complete) with two steering bellows

Suitable for: R8 (All models) / Caravelle / Floride S A110 (All models) / Alpine GT4 Matradjet This adjustable steering kit replaces the original "Fork" type steering rods. To install the adjustable rods, it is...

Reference: 4601

€95.00 (tax incl.)

In stock

Steering ball joint only of the adjustable tie rod kit

Steering ball joint only of the adjustable tie rod kit

Steering ball joint only of the adjustable tie rod kit

Top of cone Ø11mm Bottom of cone Ø12mm Cone axis: M10x125 Ball joint / connecting rod: M14x150

Reference: 4616

€28.00 (tax incl.)

In stock

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

Reference: 4603

€2.50 (tax incl.)

In stock

Ball joint nut only ref 4616 - 1

Ball joint nut only ref 4616 - 1

Ball joint nut only ref 4616

Reference: 4617

€0.80 (tax incl.)

In stock

Adjustable tie rod rubber boot - 1

Adjustable tie rod rubber boot - 1

Rubber bellows for adjustable steering rod

Suitable for: R8 (All models) / Caravelle / Floride S A110 (All models) / Alpine GT4 A310 V6 (Left side boot) Matradjet

Reference: 4620

€6.00 (tax incl.)

In stock

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - Réf 6032275 / 7700522476

Reference: 4602

€12.00 (tax incl.)

In stock

Rack output ball joint and rear tie rod end - 1

Rack output ball joint and rear tie rod end - 1

Rack and pinion output ball joint or tie rod end ball joint Rear - M12x100 (Right hand thread) - Ref 7700504987

Suitable for: Eye end cap of rack and pinion - Ref 0824373600 / 7700504987 Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987 Exhaust hanger - A310 V6 - Ref 7700504987 Inner diameter of the eye: Ø...

Reference: 4605

€16.00 (tax incl.)

In stock

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315

Reference: 4604

€3.50 (tax incl.)

In stock

Rack eye counter nut M12 - 1

Rack eye counter nut M12 - 1

M12 rack eye lock nut

Reference: 4615

€1.00 (tax incl.)

In stock

"Reinforced" steering flector - 1

"Reinforced" steering flector - 1

"Reinforced" steering flector

Reference: 2601

€6.50 (tax incl.)

In stock

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Reference: 4618

€3.50 (tax incl.)

In stock

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10

Reference: 4609

€4.50 (tax incl.)

In stock

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591

Reference: 4608

€12.50 (tax incl.)

In stock

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

direct steering kit 9-tooth pinion with offset rings for rack - ref 600000685

Reference: 4606

€172.00 (tax incl.)

Out of stock

Eccentric bronze ring for direct steering - 1

Eccentric bronze ring for direct steering - 1

Eccentric ring in bronze for direct steering

Rings for kit ref 4606

Reference: 4621

€26.00 (tax incl.)

In stock

Pair of adjustable rack support - 1

Pair of adjustable rack support - 1

Pair of adjustable rack support

Reference: 4612

€74.00 (tax incl.)

In stock

Rack reinforcement (from rack to rack) - 1

Rack reinforcement (from rack to rack) - 1

Rack reinforcement (from crosspiece to rack)

Reference: 4614

€69.00 (tax incl.)

Out of stock

Steering column support - A110 - Standard exchange - 1

Steering column support - A110 - Standard exchange - 1

Steering column support - A110 - Standard exchange

Return your old column before ordering

Reference: 6600-A

€140.00 (tax incl.)

In stock

Steering column support - A110 - Without Standard exchange - 1

Steering column support - A110 - Without Standard exchange - 1

Steering Column Support - A110 - Without Standard Exchange

Reference: 6600-B

€198.00 (tax incl.)

In stock

Steering column rubber ring Ø22.5mm x 36mm - ref 0854868000 - 1

Steering column rubber ring Ø22.5mm x 36mm - ref 0854868000 - 1

Steering column rubber ring Ø22.5mm x 36mm - ref 0854868000

Reference: 4611

€3.50 (tax incl.)

In stock

Steering column passage rubber - ref 0554354700 - 1

Steering column passage rubber - ref 0554354700 - 1

Steering column passage rubber - ref 0554354700

Reference: 4610

€7.00 (tax incl.)

In stock

Complete pedal passage plate (2 pieces) - ref 6000000812 and 6000000813 - 1

Complete pedal passage plate (2 pieces) - ref 6000000812 and 6000000813 - 1

Complete pedal passage plate (2 pieces) - ref 6000000812 and 6000000813

Reference: 6324

€42.00 (tax incl.)

In stock

Triangle upper ball joint - ref 0996006600 - 1

Triangle upper ball joint - ref 0996006600 - 1

Triangle upper ball joint - ref 0996006600

Reference: 4334

€20.00 (tax incl.)

In stock

Triangle lower ball joint - ref 0996006500 - 1

Triangle lower ball joint - ref 0996006500 - 1

Triangle lower ball joint - ref 0996006500

Reference: 4333

€19.00 (tax incl.)

In stock

Upper/lower ball joint "adaptable" rubber dust cover - large model - 1

Upper/lower ball joint "adaptable" rubber dust cover - large model - 1

Upper/lower ball joint "adaptable" rubber dust cover - large model

Not suitable for replacing the original ball joint bellows

Reference: 4376

€2.50 (tax incl.)

In stock

“Adaptable” rubber dust cover for lower or upper ball joint (large model) - 1

“Adaptable” rubber dust cover for lower or upper ball joint (large model) - 1

“Adaptable” rubber dust cover for lower or upper ball joint (large model)

Reference: 4607

€2.50 (tax incl.)

In stock

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600 - 1

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600 - 1

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600

Matradjet back

Reference: 4335

€9.00 (tax incl.)

In stock

Upper triangle silent block - Ø14x26x44 - ref 0854637700 - 2

Upper triangle silent block - Ø14x26x44 - ref 0854637700 - 2

Upper triangle silent block - Ø14x26x44 - ref 0854637700

Reference: 4336

€9.50 (tax incl.)

In stock

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper

Reference: 4338

€6.50 (tax incl.)

In stock

Lower wishbone rubber buffer - 1

Lower wishbone rubber buffer - 1

Lower wishbone rubber bumper

Reference: 4337

€8.00 (tax incl.)

In stock

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Reference: 4340

€9.50 (tax incl.)

In stock

Eccentric nut paste - ref 0607464800

Eccentric nut paste - ref 0607464800

Eccentric nut paste - ref 0607464800

Reference: 4341

€3.00 (tax incl.)

Out of stock

8 special square head lower triangle fixing screws - 1

8 special square head lower triangle fixing screws - 1

8 special square head lower triangle fixing screws

Reference: 4339

€33.00 (tax incl.)

In stock

Lower triangle axis - ref 055405840 - 1

Lower triangle axis - ref 055405840 - 1

Lower triangle axle - ref 055405840

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4342

€14.00 (tax incl.)

In stock

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut M14x200 - Ref 8083101442 / ref 7703034031

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4375

€1.50 (tax incl.)

Out of stock

Upper wishbone axle - ref 060798800 - 1

Upper wishbone axle - ref 060798800 - 1

Upper wishbone axle - ref 060798800

Reference: 4343

€32.00 (tax incl.)

In stock

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle or lower or upper suspension ball joint nut M12x125 - ref 8083111252 / 7703034005

Reference: 4344

€1.50 (tax incl.)

In stock

Kit Dangel - Front axle camber adjustment - 1

Kit Dangel - Front axle camber adjustment - 1

Kit Dangel - Front axle camber adjustment

Supplied with adjustment key.

Reference: 4378

€382.00 (tax incl.)

In stock

Dangel kit bronze ring

Dangel kit bronze ring

Dangel kit bronze ring

Reference: 4619

€32.00 (tax incl.)

In stock

Pair of upper wishbone reinforcement plates R and G - 1

Pair of upper wishbone reinforcement plates R and G - 1

Pair of right and left upper wishbone reinforcement plates

Reference: 4357

€120.00 (tax incl.)

Out of stock

Lower wishbone reinforcement plate - 1

Lower wishbone reinforcement plate - 1

Lower wishbone reinforcement plate

Reference: 4356

€18.00 (tax incl.)

In stock

Pair of front tie rods - A110.1300/1600 - 1

Pair of front tie rods - A110.1300/1600 - 1

Pair of front tie rods - A110.1300/1600

Assembly Group 4

Reference: 6343

€152.00 (tax incl.)

Out of stock

Rubber silent block for external stabilizer bar on wishbone - ref 0607482800 - 1

Rubber silent block for external stabilizer bar on wishbone - ref 0607482800 - 1

Rubber silent block for stabilizer bar (External on triangle) Ø 18mm - ref 0607482800

Reference: 4349

€4.00 (tax incl.)

In stock

Outer silent block jumper - ref 0606399500 - 1

Outer silent block jumper - ref 0606399500 - 1

Outer silent block jumper - ref 0606399500

Reference: 4350

€5.50 (tax incl.)

In stock

Round internal rubber silent block for stabilizer bar - ref 0608199900 - 1

Round internal rubber silent block for stabilizer bar - ref 0608199900 - 1

Round internal rubber silent block for stabilizer bar - ref 0608199900

Reference: 4374

€4.00 (tax incl.)

In stock

Center silent block stabilizer bar support - 1

Center silent block stabilizer bar support - 1

Center silent block stabilizer bar support

Reference: 4384

€46.00 (tax incl.)

In stock

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Reference: 4346

€68.00 (tax incl.)

In stock

Bearing support cup - ref 0608242200 - 1

Bearing support cup - ref 0608242200 - 1

Bearing support cup - ref 0608242200

Reference: 4345

€6.50 (tax incl.)

In stock

Kit of 2 Front spindle bearings with oil seal and nut - A110.1600 (VD/ SX) / A310.4 / A310.6 - 1

Kit of 2 Front spindle bearings with oil seal and nut - A110.1600 (VD/ SX) / A310.4 / A310.6 - 1

Kit of 2 Front spindle bearings with oil seal and nut - A110.1600 (VD/ SX) / A310.4 / A310.6

Reference: 6341

€162.00 (tax incl.)

In stock

Front wheel hub oil seal (Right or left) - Ø42x62x8 - ref 6000047156 - 1

Front wheel hub oil seal (Right or left) - Ø42x62x8 - ref 6000047156 - 1

Front wheel hub oil seal (Right or left) - Ø42x62x8 - ref 6000047156

Reference: 7360

€5.00 (tax incl.)

In stock

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200

Ditto R16 rear drum

Reference: 4372

€11.50 (tax incl.)

In stock

Front hub cap - ref 6000001872 - 1

Front hub cap - ref 6000001872 - 1

Front hub cap - ref 6000001872

Reference: 6340

€5.00 (tax incl.)

In stock

Front and rear brake disc mounting bolts - 1

Front and rear brake disc mounting bolts - 1

Front and rear brake disc mounting bolts

M10X150 Reference 0605690102

Reference: 4477

€3.00 (tax incl.)

In stock

Rear trumpet stud grower washer and brake disc screw (Front or Rear) - M10

Rear trumpet stud grower washer and brake disc screw (Front or Rear) - M10

Rear trumpet stud grower washer and brake disc screw (Front or Rear) - M10

Reference: 4313

€0.60 (tax incl.)

In stock

Lower brake disc mounting bolt nut (Front or Rear) - m10x150 - 1

Lower brake disc mounting bolt nut (Front or Rear) - m10x150 - 1

Lower brake disc mounting bolt nut (Front or Rear) - m10x150

Reference: 4398

€0.80 (tax incl.)

In stock

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Reference: 4386

€5.00 (tax incl.)

In stock

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Reference: 4327

€3.00 (tax incl.)

In stock

Hex wheel nut chromed steel - 60° cone - M12x125

Hex wheel nut chromed steel - 60° cone - M12x125

Hex wheel nut chromed steel - 60° cone - M12x125

Reference: 4329

€6.50 (tax incl.)

In stock

Hex wheel nut chromed steel - 90° cone - M12x125

Hex wheel nut chromed steel - 90° cone - M12x125

Hex wheel nut chromed steel - 90° cone - M12x125

Reference: 4328

€6.50 (tax incl.)

In stock

Wheel nut group 4 galvanized steel - 60° cone - M12x125

Wheel nut group 4 galvanized steel - 60° cone - M12x125

Wheel nut group 4 galvanized steel - 60° cone - M12x125

Reference: 6331

€3.25 (tax incl.)

In stock

Wheel nut group 4 galvanized steel - 90° cone - M12x125

Wheel nut group 4 galvanized steel - 90° cone - M12x125

Wheel nut group 4 galvanized steel - 90° cone - M12x125

Reference: 6330

€3.25 (tax incl.)

In stock

Shock absorber support - R8 and A110 (1600 VD) - ref 0555496600 - 2

Shock absorber support - R8 and A110 (1600 VD) - ref 0555496600 - 2

Shock absorber support - R8 and A110 (1600 VD) - ref 0555496600

Reference: 6321

€29.00 (tax incl.)

Out of stock

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900 - 1

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900 - 1

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900

Reference: 4353

€34.00 (tax incl.)

Out of stock

Front shock absorber mounting short bolt Ø 9 - ref 0605386200 - 1

Front shock absorber mounting short bolt Ø 9 - ref 0605386200 - 1

Front shock absorber mounting short bolt Ø 9 - ref 0605386200

Reference: 4354

€4.50 (tax incl.)

In stock

Showing 1-64 of 101 item(s)

1

Left column

Top

Please sign in first.

Sign in