Steering and Front Axle Alpine A108 / Interlagos

Our spare parts for the steering and front axle of your Renault Alpine A108 / Interlagos.

Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Renault Alpine A108 / Interlagos.

Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, suspension spring, pedal axle, silentbloc, stabilizer bar, support, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, shock absorber,...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give your old car a new lease of life with quality components.

Read moreShow less

Home
>
Alpine
>
Alpine A108 / Interlagos
>
Steering and Front Axle Alpine A108 / Interlagos

Alpine A108 / Interlagos

Purchase a gift voucher

Rack output ball joint and rear tie rod end - 1

Rack output ball joint and rear tie rod end - 1

Rack and pinion output ball joint or tie rod end ball joint Rear - M12x100 (Right hand thread) - Ref 7700504987

Suitable for: Eye end cap of rack and pinion - Ref 0824373600 / 7700504987 Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987 Exhaust hanger - A310 V6 - Ref 7700504987 Inner diameter of the eye: Ø...

Reference: 4605

€16.00 (tax incl.)

In stock

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315

Reference: 4604

€3.50 (tax incl.)

In stock

Set of adjustable steering rods (For cone Ø 11mm to 12 mm) - 1

Set of adjustable steering rods (For cone Ø 11mm to 12 mm) - 1

Set of adjustable steering rods (For cone Ø 11mm to 12 mm)

4CV (from 03/1955) / Dauphine / Floride A106 /A108

Reference: 2610

€82.00 (tax incl.)

Out of stock

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - Réf 6032275 / 7700522476

Reference: 4602

€12.00 (tax incl.)

In stock

Original ball joint protection rubber - 1

Original ball joint protection rubber - 1

Original ball joint protection rubber

Reference: 1608

€2.00 (tax incl.)

Out of stock

"Reinforced" steering flector - 1

"Reinforced" steering flector - 1

"Reinforced" steering flector

Reference: 2601

€6.50 (tax incl.)

In stock

Flywheel Elastic Coupling - 1

Flywheel Elastic Coupling - 1

Flywheel Elastic Coupling

Reference: 1604

€36.00 (tax incl.)

In stock

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

direct steering kit 9-tooth pinion with offset rings for rack - ref 600000685

Reference: 4606

€172.00 (tax incl.)

Out of stock

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591

Reference: 4608

€12.50 (tax incl.)

In stock

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10

Reference: 4609

€4.50 (tax incl.)

In stock

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Reference: 4618

€3.50 (tax incl.)

In stock

Pivot set with 4 bronze rings and silent block - 2nd model - 1

Pivot set with 4 bronze rings and silent block - 2nd model - 1

Pivot set with 4 bronze rings and silent bloc - 2nd model

Reference: 1307

€220.00 (tax incl.)

In stock

Bronze swivel ring - Ø21x24x30 - 2nd model - 1

Bronze swivel ring - Ø21x24x30 - 2nd model - 1

Bronze swivel ring - Ø21x24x30 - 2nd model

Reference: 1308

€18.50 (tax incl.)

In stock

Stainless steel pivot pin wedging washer - Thickness 0.2mm - 1st and 2nd model - 1

Stainless steel pivot pin wedging washer - Thickness 0.2mm - 1st and 2nd model - 1

Stainless steel pivot pin wedging washer - Thickness 0.2mm - 1st and 2nd model

Thickness: 0.2mm

Reference: 1328

€2.00 (tax incl.)

In stock

Stainless steel pivot pin wedging washer - Thickness 0.5mm - 1st and 2nd model - 1

Stainless steel pivot pin wedging washer - Thickness 0.5mm - 1st and 2nd model - 1

Stainless steel pivot pin wedging washer - Thickness 0.5mm - 1st and 2nd model

Thickness: 0.5mm

Reference: 1333

€2.00 (tax incl.)

In stock

Dust cover for 2nd model pivot with nylon washer - 1

Dust cover for 2nd model pivot with nylon washer - 1

Dust cover for 2nd model pivot with nylon washer

For pivot 2nd model reference 1307

Reference: 1306

€9.50 (tax incl.)

In stock

Lower castellated nut for pivot or steering knuckle M12x150 - 4CV (1st or 2nd model)/Dauphine - ref 706315906 - 1

Lower castellated nut for pivot or steering knuckle M12x150 - 4CV (1st or 2nd model)/Dauphine - ref 706315906 - 1

Lower castellated nut for pivot or steering knuckle M12x150 - 4CV (1st or 2nd model)/Dauphine - ref 706315906

Reference: 2325

€4.00 (tax incl.)

In stock

Silent block lower or upper pivot - Ø12x26x36mm

Silent block lower or upper pivot - Ø12x26x36mm

Silent block lower or upper pivot - Ø12x26x36mm

Reference: 1312

€7.50 (tax incl.)

In stock

Silent block for triangle axle (Ø: 16 mm inside / 36 mm outside) - 1

Silent block for triangle axle (Ø: 16 mm inside / 36 mm outside) - 1

Silent block for triangle axle (Ø: 16 mm inside / 36 mm outside)

Reference: 2305

€7.00 (tax incl.)

In stock

Lower triangle axis - ref 055405840 - 1

Lower triangle axis - ref 055405840 - 1

Lower triangle axle - ref 055405840

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4342

€14.00 (tax incl.)

In stock

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut M14x200 - Ref 8083101442 / ref 7703034031

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4375

€1.50 (tax incl.)

Out of stock

Lower wishbone rubber buffer - 1

Lower wishbone rubber buffer - 1

Lower wishbone rubber bumper

Reference: 4337

€8.00 (tax incl.)

In stock

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper

Reference: 4338

€6.50 (tax incl.)

In stock

Front stabilizer bar link silent block and rear spring rods - Ø 9x21x21mm - 1

Front stabilizer bar link silent block and rear spring rods - Ø 9x21x21mm - 1

Front stabilizer bar link silent block and rear spring rods - Ø 9x21x21mm

- Front stabilizer bar connecting rod silent block Ø 21 - Silent block of rods in rear spring (1st model) - Rear oil shock absorber arm silent block (1st model) ref 8 511 922

Reference: 1309

€5.50 (tax incl.)

In stock

Silent block for stabilizer bar link - Ø 9x26x21mm

Silent block for stabilizer bar link - Ø 9x26x21mm

Silent block for stabilizer bar link - Ø 9x26x21mm

Reference: 2309

€9.00 (tax incl.)

In stock

Stabilizer bar rubber - inner Ø 10mm

Stabilizer bar rubber - inner Ø 10mm

Stabilizer bar rubber - inner Ø 10mm

Reference: 1311

€6.00 (tax incl.)

In stock

Stabilizer bar rubber - inner Ø 12mm - 1

Stabilizer bar rubber - inner Ø 12mm - 1

Stabilizer bar rubber - inner Ø 12mm

Reference: 1329

€6.00 (tax incl.)

In stock

Outer front bearing - Ø 17x40x13.2mm

Outer front bearing - Ø 17x40x13.2mm

Outer front bearing - Ø 17x40x13.2mm

Reference: 1318

€24.00 (tax incl.)

In stock

Inner front bearing - Ø 20x47x15.2 - 1

Inner front bearing - Ø 20x47x15.2 - 1

Inner front bearing - Ø 20x47x15.2

Reference: 1317

€24.00 (tax incl.)

In stock

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200

Ditto R16 rear drum

Reference: 4372

€11.50 (tax incl.)

In stock

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Reference: 4327

€3.00 (tax incl.)

In stock

Pair of front "non-aerostable suspension" shock absorbers - Dauphine (R1090) from 1956 to the end ... (Dauphine Gordini included

Pair of front "non-aerostable suspension" shock absorbers - Dauphine (R1090) from 1956 to the end ... (Dauphine Gordini included

Pair of front "non-aerostable suspension" shock absorbers - Dauphine (R1090) from 1956 to the end ... (Dauphine Gordini included

For the Alpine A108: Consult us before placing the order because several assemblies are possible.

Reference: 2312

€152.00 (tax incl.)

In stock

Pair of front shock absorbers "aerostable suspension" - Dauphine and Ondine from 1956 to the end... (Dauphine Gordini included)

Pair of front shock absorbers "aerostable suspension" - Dauphine and Ondine from 1956 to the end... (Dauphine Gordini included)

Pair of front shock absorbers "aerostable suspension" - Dauphine and Ondine from 1956 to the end... (Dauphine Gordini included)

For the Alpine A108: Consult us before placing the order because several assemblies are possible.

Reference: 2310

€152.00 (tax incl.)

In stock

Adaptable plastic dust cover for shock absorber rod protection - 1

Adaptable plastic dust cover for shock absorber rod protection - 1

Adaptable plastic dust cover for shock absorber rod protection

Dimensions: - Length 145mm - Interior Ø 46mm and Ø of the rod 10mm

Reference: 1350

€4.50 (tax incl.)

In stock

Kit of 2 pedal springs (clutch and brake)

Kit of 2 pedal springs (clutch and brake)

Kit of 2 pedal springs (clutch and brake)

Reference: 4367

€8.00 (tax incl.)

In stock

Pedal spring hanger - ref 0604582900 - 1

Pedal spring hanger - ref 0604582900 - 1

Pedal spring hanger - ref 0604582900

Reference: 4114

€1.00 (tax incl.)

In stock

Kit of 2 nylon pedal axle rings - ref 0604661400 - 1

Kit of 2 nylon pedal axle rings - ref 0604661400 - 1

Kit of 2 nylon pedal axle rings - ref 0604661400

Reference: 4365

€9.00 (tax incl.)

In stock

Bronze / PTFE (Teflon) pedal axle ring - ref 0604661400 - 1

Bronze / PTFE (Teflon) pedal axle ring - ref 0604661400 - 1

Pedal shaft bronze / PTFE (Teflon) ring - ref 0604661400

Maintenance-free ring

Reference: 4399

€8.00 (tax incl.)

In stock

Spray copper grease - 1

Spray copper grease - 1

Spray copper grease

Only delivery in France

Reference: C013

€19.00 (tax incl.)

In stock

Multipurpose grease (rolling, bearing, etc.) - 1

Multipurpose grease (rolling, bearing, etc.) - 1

Multipurpose grease (bearing, bearing, etc.)

Reference: C027

€7.00 (tax incl.)

In stock

Hex cross key (Size 17,19, 22mm & 13/16") - 1

Hex cross key (Size 17,19, 22mm & 13/16") - 1

Hex cross key (Size 17,19, 22mm & 13/16")

Reference: T006

€19.00 (tax incl.)

In stock

Ball joint extractor (Fork Ø20mm) - 1

Ball joint extractor (Fork Ø20mm) - 1

Ball joint extractor (Fork Ø20mm)

Reference: T005

€50.00 (tax incl.)

In stock

Oiler assortment (110 pieces) - 1

Oiler assortment (110 pieces) - 1

Oiler assortment (110 pieces)

Reference: C039

€38.00 (tax incl.)

In stock

Assortment of internal circlips - 1

Assortment of internal circlips - 1

Assortment of internal circlips

Reference: C040

€15.50 (tax incl.)

In stock

Assortment of external circlips (300 pieces) - 1

Assortment of external circlips (300 pieces) - 1

Assortment of external circlips (300 pieces)

Reference: C041

€15.50 (tax incl.)

In stock

Assortment of industrial meca pins (450 pcs) - 1

Assortment of industrial meca pins (450 pcs) - 1

Assortment of industrial meca pins (450 pcs)

Reference: C042

€39.00 (tax incl.)

In stock

Cotter pin assortment (550 pieces) - 1

Cotter pin assortment (550 pieces) - 1

Cotter pin assortment (550 pieces)

Reference: C043

€17.50 (tax incl.)

In stock

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces - 1

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces - 1

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces

Reference: C044

€16.00 (tax incl.)

In stock

1

Left column

Top

Please sign in first.

Sign in