In stock
R5 Alpine Atmo engine (1223) - 1397cm³ engine (type 840-25) (Page 2 sur 2)
In stock
In stock
11 tooth sprocket
- Height of the teeth 9mm
- Suitable for 688, 689, 810 and 840 engine.
In stock
In stock
Height of the joint plane / bottom of the strainer: 140mm
In stock
In stock
Pressure: 0 - 6 bar
Release pressure: 0.60 bar
Thread: M14x150
To be mounted with ref AVP5091 for R5 Alpine engine (1223)
In stock
For mounting the oil pressure sender (AVP4079) on the R5 alpine engine
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
In stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been...
In stock
HTX COLLECTION 20W-50 oil is a personalized solution for
old and recent collector's vehicles whose engines have been
restored to original condition with or without turbocharger, in particular
those that have been...
In stock
HTX PRESTIGE 20W-50 oil is a mineral engine oil suitable for
to old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a film
constant oil, even in hot weather, to offer the best...
In stock
In stock
In stock
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
Only delivery in France
Epoxy coating for the interior of the engine block.
0.5kg of resin and hardener
0.5l of thinner
In stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Aluminum gray RAL 9006
Can be applied directly with a brush or with a spray...
In stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: RAL 9005 BLACK
Can be applied directly with a brush or with a spray gun by...
In stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: green RAL 6005
Can be applied directly with a brush or with a spray gun by...
In stock
Only delivery in France
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Bright blue RAL 5005
Can be applied directly with a brush or with a spray gun...
In stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Red brown RAL 3011
Can be applied directly with a brush or with a spray gun...
In stock
Only delivery in france
Anti-corrosion paint for engine block, housing, brake drum and gearbox.
Resistant to 180°C
Capacity: 500ml
Colour: Fire red RAL 3000
Can be applied directly with a brush or with a spray gun by...
In stock
Only delivery in France
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
In stock