Out of stock
Pièces Détachées Carburateur Weber 40 DCOE
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M5X22 screws
Sold individually, requires 9 pieces for one carburetor
Number 5 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 83 on exploded view
In stock
Lower bowl cover gasket ref 48110 for WEBER 40DCOE and 45DCOE
Number 36 on exploded view
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors,
For 23g or 26g brass or plastic float,
Requires 1 piece per carburetor,
Number 72 on the exploded view,
Also suitable for the following carburetors: DCOE, DCO/SP,...
In stock
In some configurations, Weber DCOE carburetors are positioned directly above the exhaust, which can create vapor lock problems due to heat: our AVP48010 plate can solve this problem
Plate can be covered with thermal...
In stock
In stock
In stock
For M12 banjo bolts
Number 70 on exploded view
In stock
For M12 banjo bolts
Number 98 on exploded view
In stock
M12 Banjo Bolt
Sold individually without gasket
Number 70 on exploded view
In stock
Banjo screw M12
Sold individually without gasket
In stock
Gasket dimensions: Ø 20x12x1mm
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 2 and number 69 on exploded view
Sold individually, 1 piece required for one carburetor
Compatible with other WEBER carburetors,...
In stock
Joint dimensions: Ø 20x16x1mm
In stock
The kit consists of:
"T" fuel connector x1
90° elbow fuel connector x1
Banjo connector screw x2
Banjo screw under head seal x2
Banjo screw lower seal x2
Hose clamp: Size 12-14mm x3
In stock
The kit consists of:
90° elbow fuel connector x1
Banjo connector screw x1
Banjo screw under head gasket x1
Banjo screw lower gasket x1
Hose clamp: Size 12-14mm x1
In stock
Sold individually, 1 required per carburetor,
Number 4 on exploded view
In stock
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettor
Thread16x1.5
Need 1 piece for a carburetor
Number 1 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Requires 1 part per carburetor
Number 3 on exploded view
Compatible with other WEBER carburetors, see below
In stock
In stock
Levier de commande d'accélérateur pour UN carburateur WEBER 40DCOE ET 45DCOE
Adaptable sur R8 et Alpine A110 avec pipe pour un carburateur WEBER
Dimension du centre de l'arbre au centre de la rotule: 23,50 mm
Rotule...
In stock
Throttle control lever for TWO WEBER 40DCOE AND WEBER 45DCOE carburetors
Allows carburetor synchronization
Suitable for R8 Gordini, Alpine A110, Simca Rallye
8mm diameter ball joint
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M5x32 screw
Head width 8mm
Number 52 on exploded view
Compatible with other WEBER carburetors, see below
In stock
In stock
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
External mounting
Fixes to the carburetor cover
In stock
In stock
Suitable for WEBER 40DCOE carburetor
Extension length from the carburetor = 25mm
Stud/nut mounting
Allows the installation of high-performance filters REF 48099 or 48100
Also suitable for AVP stock filter ref 48103...
In stock
Aluminum air intake horn/trumpet for WEBER 40DCOE carburetor
43mm extension over the carburetor
Stud/nut mounting
Allows installation of high-performance filter REF 48099 or 48100
Also suitable for AVP sock filter...
In stock
Air intake horn/trumpet for WEBER 40DCOE carburetor
Extension length from the carburetor: 55mm
ATTENTION: Must be fitted with venturi REF 48084 or 48085
Fixing with kit REF 48097
Suitable for fitting AVP filters ref...
In stock
Allows to clamp the horns on the body of the WEBER 40DCOE carburetor
ATTENTION: essential for REF 48093 horns
Kit for a carburetor consisting of 4 stop tabs, 4 washers and 4 nuts
Also suitable for WEBER 42DCOE...
In stock
Fits WEBER 40DCOE first and latest generation carburetors
This spacer is required if you are using the REF 48084 or REF 48085 venturis without the AVP 55mm air intake nozzles, part number 48093
It fills the gap...
In stock
M6x23
Number 23 on exploded view
In stock
In stock
In stock
Air intake horn/trumpet filters for WEBER 40DCOE carburetor
Fitment possible on all AVP air intake horns
Mesh filters that feature two layers of stainless steel mesh with a filter layer in between to ensure maximum...
In stock
Suitable for Cornet/Air intake trumpet of the Weber DCOE 40 carburetor,
Fixing by screw necklace on rubber flange for perfect sealing,
Possible assembly on all AVP cornets for DCOE40,
Overall length: 115mm,
Diameter:...
In stock
Installation possible on all AVP horns
Length 115mm (can be cut to size)
Clamp included
Sold in pairs
In stock
Suitable for WEBER 40DCOE carburetors with spring lock,
Suitable for first-generation WEBER 40DCOEs with 55mm air intake nozzle REF 48093,
WARNING: If you are not using the 55mm air intake nozzle REF 48093, you must...
In stock
Suitable for Latest generation WEBER 40DCOE carburetor with 55mm air intake nozzle REF 48093
WARNING: If you are not using the 55mm air intake nozzle REF 4093, you must use the spacer REF 48087 to fill the gap...
In stock
Kit of 4 springs for locking the venturi in the body of the WEBER DCOE 40 and DCOE 45 carburetor
For first generation Caburator WEBER
In stock
WARNING: Suitable for Venturi ref 48085 and ref 48086 for WEBER 40DCOE and 45DCOE carburetors.
Allows you to stop the movement of the venturi for older generation DCOEs, and stop the movement of the nozzle and...
In stock
Brake for venturi locking screw for carburettor WEBER 40DCOE and 45DCOE latest generation
Number 24 on exploded view
In stock
In stock
Suitable for all types of WEBER 40DCOE carburetors
In stock
Suitable for all types of WEBER 40DCOE carburetors
In stock
Suitable for all types of WEBER 40DCOE carburetors
In stock
Suitable for first generation WEBER 40DCOE and 45DCOE carburetors
Sold individually, requires 2 pieces for one carburetor
Number 56 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE 151 and 45DCOE 152 (latest generation)
Sold individually, need 2 pieces for one carburettor
Number 56 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Idle speed adjustment screw spring for WEBER 40DCOE and 45DCOE
sold individually, ,eed 2 pieces for one carburettor
Part number 47 on the exploded view
Fits other WEBER carburettors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE
sold individually, need 2 pieces for one carburettor
Part number 46 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Suitable for carburettor WEBER 40DCOE / 45DCOE
To ensure a perfect seal between the mixture screw and the carburettor body (do not forget the support cup)
sold individually, need 2 pieces for a carburettor
Number...
In stock
Air bypass screw for carburettor WEBER 40DCOE and 45DCOE
Number 26 On exploded view
Also suitable for the following carburettors: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT .
In stock
Air bypass screw locking nut for carburettor WEBER 40DCOE and 45DCOE
M5
Number 27 On exploded view
Also suitable for: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT
In stock
Air bypass screw cover for carburettor WEBER 40DCOE and 45DCOE latest generation
Number 25 on exploded view
Also suitable for the following carburettors: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT
In stock
M9
Sold individually, 2 required per carburetor
Number 48 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Part number 65 on exploded view
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE
Sold individually, need 2 pieces for one carburetor
Number 64 on exploded view
Also suitable for the following carburetors: 32 DCOF, 38 DCOE, 40 DCO3, 40 DCOE, 42 DCOE, 45...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 63 on exploded view
Also suitable for the following carburettors: 38/40/42/45/48 DCOE, 48/50/55 DCO/SP, 45...
In stock
Suction and discharge valve for pump for WEBER 40DCOE and WEBER 45DCOE carburettor
Location at the bottom of the tank
Requires 1 piece per carburettor
Number 43 on exploded view
In stock
Inspection hatch for WEBER 40DCOE and 45DCOE
Number 80 on exploded view
In stock
Paper gasket for inspection hatch for cover ref 48120 for WEBER 40DCOE and 45DCOE
Number 41 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Sold individualy, requires 2 pieces per carburetor
Number 32 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE, 45DCOE and IDF carburetors
Sold individually, requires 2 pieces per carburetor
Number 31 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 78 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE AND 45DCOE carburetors
This fits on the side opposite the throttle control
Part number 86 on exploded view
Also suitable for: 30 IBA, 32 IBA, 36 DCNF, 36 DCNFA, 36 DCNV, 36 DCNVA, 38 DCOE,...
In stock
Suitable for new generation WEBER carburetors
Flat type screw (not tapered)
Sold infividually, requires 4 pieces for 1 carburetor
Number 35 on exploded view
Compatible with other WEBER carburetors, see below.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors old generation for the throttle screw,
Suitable for all types of WEBER 40 and 45 DCOE carburetors for the inspection hatch,
Sold individually,
Countersunk head and...
In stock
Suitable for old generation WEBER 45DCOE carburettor
WARNING: must be mounted with flat screw REF 48052. Drilling for accelerator pump control to be done.
Overall length: 180mm
Number 85 on exploded view
Also...
In stock
Throttle valve for WEBER 40DCOE carburettor
Angle of 78°
16mm between fixing holes
Number 33 on exploded view
In stock
Shifting washer against throttle shaft bearing for carburettor WEBER 40DCOE AND WEBER 45DCOE
Thickness: 0.5mm
Inner Ø: 7mm
Outer Ø: 14mm
Number 77 on exploded view
In stock
Split pin for securing the pump control on the throttle valve shaft for WEBER 40DCOE and 45DCOE carburetors
Number 82 on exploded view
Compatible with WEBER carburetors: 32 DCOF, 35 DCNL, 36 IDF, 38 DCNL, 38 DCOE, 40...
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettors.
Wire thickness 1 mm and wound length 33 mm.
Number 50 on exploded view
Also suitable for the following carburettors: 38 DCOE, 40 DCOE, 42 DCOE, 45 DCOE.
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettors.
Wire thickness is 1.15mm and wound length is 31mm.
For a standard spring, please refer to REF 48075.
Number 50 on exploded view.
Also suitable for the...
In stock
Complete kit for removing and sealing the internal and external choke system on WEBER 40DCOE and 45DCOE carburetors.
Kit supplied with installation instructions.
In stock
In stock
In stock
Choke filter for WEBER 40DCOE and 45DCOE carburetors
Requires 1 piece per carburetor
Part number 87 on exploded view
Also suitable for: 35 DCNL, 36 DCNF, 36 DCNFA, 38 DCNL, 40 DCNF, 40 DCNL, 38 DCOE, 40 DCOE, 42...
In stock
WARNING: This fits with spring guide REF 48040
Suitable for WEBER 40DCOE and 45DCOE carburetors
Also suitable for: 22 IM, 26 IM, 26 IMB, 28/36 DCB, 28/36 DCD, 32 IMPE, 34 DCHD, 34 DCHE, 34 DCS, 35 DCNL, 36 DCD, 38...
In stock
Allows the guiding of the choke piston spring for WEBER 40DCOE and WEBER45DCOE carburettors
ATTENTION: Must be fitted with retaining ring REF 48039
Also suitable for the following carburettors: 38 DCOE, 40 DCOE, 42...
In stock
Starter piston spring for WEBER 40DCOE and 45DCOE carburettor
Number 55 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Number 54 on exploded view
Also suitable for: 35 DCNL, 38 DCNL, 38 DCOE, 40 DCOE, 40 DCNL, 42 DCOE, 45 DCOE.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M4X16 screw
Sold individually, requires 2 pieces for one carburetor
Number 40 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
LEFT Cable Stop
Number 42 on exploded view
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
RIGHT-HAND COVER STOP
Number 42 on exploded view
In stock
Allows you to replace the choke cover with a simple WEBER choke cover for a 40DCOE or 45DCOE carburetor.
Suitable for carburetors: 40 DCOE, 45 DCOE, 40 IDF, 44 IDF, 48 IDF.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 51 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 74 in exploded view
Also suitable for carburetors: 34 DCHE, 36 DCS, 40 DCOM, 45 MCHH22.
In stock
Accelerator pump piston for WEBER 40DCOE and 45DCOE
Number 53 on exploded view
Also suitable for carburetors: 32 IMPE, 38 DCOE, 40 DCOE, 42 DCOE, 45 DCOE, 48 DCOE, 48 DCO/SP, 50 DCO/SP, 55 DCO/SP.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors,
Free length : 59mm,
Wire gauge : 0.4mm,
Number 60 on exploded view
In stock
Accelerator Pump Rod Kit for WEBER 40DCOE and 45DCOE
Dimensions 54.5mm and 38.55mm (see photo)
Standard size pump rod
Number 61 on exploded view
In stock
Fuel pressure gauge kit.
Allows fuel pressure adjustment with the "King" filter REF 6825.
Graduation from 0.20g up to 1 bar.
With connector and clamp for 6 or 8 diameter flexible hoses.
The pressure gauge can be...
In stock
Allows easy adjustment of the float with one side of the tool calibrated to 5mm and the other to 6mm.
Allows direct action on the float tab thanks to a slot at the end of the tool
In stock
Allows easy adjustment of the float with one side of the tool calibrated to 8mm and the other side to 9mm.
Allows direct action on the float tab thanks to a slot at the end of the tool.
In stock
Allows control of nozzle calibration
Graduation is 0.05 mm in 0.05 mm increments, with a minimum of 0.45 mm and a maximum of 1.5 mm.
In stock
Allows control of nozzle calibration
Graduation is 0.10 mm in 0.10 mm increments, with a minimum of 1.5 mm to 3.00 mm and a maximum of 1.5 mm.
In stock
Synchronizer/Synchrometer to be placed directly in the air intake horn for timing adjustment
Suitable for all AVP air intake horns
Graduation from 1-30kg/h
In stock
Sold with drill bit holderIncludes 5 drill bits in each of the following sizes:0.6mm0.7mm0.8mm0.9mm1.0mm1.1mm1.2mm1.3mm1.4mm1.5mm1.6mm1.8mm2.0mm2.1mm2.2mm2.3mm2.4mm2.5 mm2.6mm2.8mm3.0mm3.2mm
In stock
In stock
This paste is suitable for petroleum-derived hydrocarbons (mineral oils, petroleum, fuel oil, leaded and unleaded gasoline, etc.), chlorinated solvents, diluted acids and bases
Replaces or is used in combination with...
In stock
In stock
F9 emulsion tube for WEBER 40DCOE and 45DCOE
Number 13 on exploded view
Also suitable for Weber carburetors: 32 DATR, 32 DRTA, 32 DMTRA, 48 DCOSP, 50 DCOSP, 55 DCOSP, 38 DCNL, 38 DCN, 40 DCNL, 40 DCOM, 45 DCO3, 45...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 13 on exploded view
Also suitable for Weber carburetors: 32 DATR, 32 DRTA, 32 DMTRA, 48 DCOSP, 50 DCOSP, 55 DCOSP, 38 DCNL, 38 DCN, 40 DCNL, 40 DCOM, 45 DCO3,...
In stock
In stock
Accelerator pump cap for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 59 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettors
Sold individually, need 2 pieces for one carburettor
Number 58 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Fit for WEBER 40DCOE and 45DCOE Carburetor
Sold individually, need 2 pieces for one carburetor
Part number 58 on exploded view
Compatible with other carburetors WEBER, see below
In stock
In stock
In stock
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Thickness 0.70 mm, super-fittable
Number 66 on exploded view
Compatible with other WEBER carburetors, see below
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock