Matra Djet Steering & Front Axle

Our spare parts for the steering and front axle of your Matra Djet

Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Matra Djet

Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, silentbloc, stabilizer bar, support, dangel kit, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, direct steering kit, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give your old car a new lease of life with quality components.

Read moreShow less

Home
>
Other brands
>
Matra Djet
>
Matra Djet Steering & Front Axle

kit of 2 adjustable steering rods with bellows - 1

kit of 2 adjustable steering rods with bellows - 1

Kit of 2 adjustable steering rods complete with two bellows

R8 / Caravelle / Floride S A110 / Alpine GT4 / Matradjet

Reference: 4601

€95.00 (tax incl.)

Out of stock

Adjustable tie rod rubber boot - 1

Adjustable tie rod rubber boot - 1

Adjustable tie rod rubber boot

R8 / Caravelle / Floride S A110 / Alpine GT4 / Matradjet / A310.6 (Right side bellows)

Reference: 4620

€6.00 (tax incl.)

In stock

Steering ball joint only of the adjustable tie rod kit

Steering ball joint only of the adjustable tie rod kit

Steering ball joint only of the adjustable tie rod kit

Top of cone Ø11mm Bottom of cone Ø12mm Cone axis: M10x125 Ball joint / connecting rod: M14x150

Reference: 4616

€28.00 (tax incl.)

In stock

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

"Adaptable" tie-rod rubber dust cover - small model - ref 0822866000

Reference: 4603

€2.50 (tax incl.)

In stock

Ball joint nut only ref 4616 - 1

Ball joint nut only ref 4616 - 1

Ball joint nut only ref 4616

Reference: 4617

€0.80 (tax incl.)

In stock

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - ref 7700522476 - 1

Original rack gaiter - ref 7700522476

Reference: 4602

€12.00 (tax incl.)

In stock

Rack output ball joint and rear tie rod end - 1

Rack output ball joint and rear tie rod end - 1

Rack output ball joint and rear tie rod end

inner diameter 10mm Ball joint M12x100

Reference: 4605

€16.00 (tax incl.)

In stock

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315

Reference: 4604

€3.50 (tax incl.)

In stock

Rack eye counter nut M12 - 1

Rack eye counter nut M12 - 1

M12 rack eye lock nut

Reference: 4615

€1.00 (tax incl.)

In stock

"Reinforced" steering flector - 1

"Reinforced" steering flector - 1

"Reinforced" steering flector

Reference: 2601

€6.50 (tax incl.)

In stock

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

9-tooth pinion direct steering kit with offset rings for rack - ref 600000685 - 1

direct steering kit 9-tooth pinion with offset rings for rack - ref 600000685

Reference: 4606

€172.00 (tax incl.)

Out of stock

Eccentric bronze ring for direct steering - 1

Eccentric bronze ring for direct steering - 1

Eccentric ring in bronze for direct steering

Rings for kit ref 4606

Reference: 4621

€26.00 (tax incl.)

In stock

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591 - 1

Rack pinion bearing with ring - 15x35x10 - ref 7700521591

Reference: 4608

€12.50 (tax incl.)

In stock

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10 - 1

Rack oil seal - 25x36x10

Reference: 4609

€4.50 (tax incl.)

In stock

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Rack cover paper seal - ref 5542056 / 7700522602

Reference: 4618

€3.50 (tax incl.)

In stock

Triangle lower ball joint - ref 0996006500 - 1

Triangle lower ball joint - ref 0996006500 - 1

Triangle lower ball joint - ref 0996006500

Reference: 4333

€19.00 (tax incl.)

In stock

Triangle upper ball joint - ref 0996006600 - 1

Triangle upper ball joint - ref 0996006600 - 1

Triangle upper ball joint - ref 0996006600

Reference: 4334

€20.00 (tax incl.)

In stock

Upper/lower ball joint "adaptable" rubber dust cover - large model - 1

Upper/lower ball joint "adaptable" rubber dust cover - large model - 1

Upper/lower ball joint "adaptable" rubber dust cover - large model

Not suitable for replacing the original ball joint bellows

Reference: 4376

€2.50 (tax incl.)

In stock

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600 - 1

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600 - 1

Lower triangle silent block - Ø16x36x41 - R8 / A110 - ref 0854637600

Matradjet back

Reference: 4335

€9.00 (tax incl.)

In stock

Upper triangle silent block - Ø14x26x44 - ref 0854637700 - 2

Upper triangle silent block - Ø14x26x44 - ref 0854637700 - 2

Upper triangle silent block - Ø14x26x44 - ref 0854637700

Reference: 4336

€9.50 (tax incl.)

In stock

Lower wishbone rubber buffer - 1

Lower wishbone rubber buffer - 1

Lower wishbone rubber bumper

Reference: 4337

€8.00 (tax incl.)

In stock

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper - 1

Upper wishbone rubber bumper

Reference: 4338

€6.50 (tax incl.)

In stock

Outer silent block jumper - ref 0606399500 - 1

Outer silent block jumper - ref 0606399500 - 1

Outer silent block jumper - ref 0606399500

Reference: 4350

€5.50 (tax incl.)

In stock

Rubber silent block for external stabilizer bar on wishbone - ref 0607482800 - 1

Rubber silent block for external stabilizer bar on wishbone - ref 0607482800 - 1

Rubber silent block for stabilizer bar (External on triangle) Ø 18mm - ref 0607482800

Reference: 4349

€4.00 (tax incl.)

In stock

Round internal rubber silent block for stabilizer bar - ref 0608199900 - 1

Round internal rubber silent block for stabilizer bar - ref 0608199900 - 1

Round internal rubber silent block for stabilizer bar - ref 0608199900

Reference: 4374

€4.00 (tax incl.)

In stock

Center silent block stabilizer bar support - 1

Center silent block stabilizer bar support - 1

Center silent block stabilizer bar support

Reference: 4384

€46.00 (tax incl.)

In stock

8 special square head lower triangle fixing screws - 1

8 special square head lower triangle fixing screws - 1

8 special square head lower triangle fixing screws

Reference: 4339

€33.00 (tax incl.)

In stock

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Eccentric nut for front wishbone caster adjustment - ref 0608311200

Reference: 4340

€9.50 (tax incl.)

In stock

Eccentric nut paste - ref 0607464800

Eccentric nut paste - ref 0607464800

Eccentric nut paste - ref 0607464800

Reference: 4341

€3.00 (tax incl.)

Out of stock

Lower triangle axis - ref 055405840 - 1

Lower triangle axis - ref 055405840 - 1

Lower triangle axle - ref 055405840

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4342

€14.00 (tax incl.)

In stock

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut - ref 8083101442 / ref 7703034031 - 1

Lower wishbone axle nut M14x200 - Ref 8083101442 / ref 7703034031

Suitable for: 4CV: After 1956 R8 / R8S / R8G Caravelle / Floride S A106 / A108 A110 Matradjet

Reference: 4375

€1.50 (tax incl.)

In stock

Upper wishbone axle - ref 060798800 - 1

Upper wishbone axle - ref 060798800 - 1

Upper wishbone axle - ref 060798800

Reference: 4343

€32.00 (tax incl.)

In stock

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle or lower or upper suspension ball joint nut M12x125 - ref 8083111252 / 7703034005

Reference: 4344

€1.50 (tax incl.)

In stock

Kit Dangel - Front axle camber adjustment - 1

Kit Dangel - Front axle camber adjustment - 1

Kit Dangel - Front axle camber adjustment

Supplied with adjustment key.

Reference: 4378

€382.00 (tax incl.)

In stock

Dangel kit bronze ring

Dangel kit bronze ring

Dangel kit bronze ring

Reference: 4619

€32.00 (tax incl.)

In stock

Pair of upper wishbone reinforcement plates R and G - 1

Pair of upper wishbone reinforcement plates R and G - 1

Pair of right and left upper wishbone reinforcement plates

Reference: 4357

€120.00 (tax incl.)

Out of stock

Lower wishbone reinforcement plate - 1

Lower wishbone reinforcement plate - 1

Lower wishbone reinforcement plate

Reference: 4356

€18.00 (tax incl.)

In stock

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Kit of 2 spindle axle bearings Ø22mm with oil seal (Ø 22x47x20.75 + Ø 17x40x13.2)

Reference: 4346

€68.00 (tax incl.)

In stock

Bearing support cup - ref 0608242200 - 1

Bearing support cup - ref 0608242200 - 1

Bearing support cup - ref 0608242200

Reference: 4345

€6.50 (tax incl.)

In stock

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200 - 1

Front hub cap - ref 0607035200

Ditto R16 rear drum

Reference: 4372

€11.50 (tax incl.)

In stock

Kit of 2 spindle bearings Ø20mm (20x47x15.2 + 17x40x13.2)

Kit of 2 spindle bearings Ø20mm (20x47x15.2 + 17x40x13.2)

Kit of 2 spindle bearings Ø20mm (20x47x15.2 + 17x40x13.2)

Reference: 4348

€44.00 (tax incl.)

In stock

Bearing support washer kit with ring and seal for spindle Ø 20mm

Bearing support washer kit with ring and seal for spindle Ø 20mm

Bearing support washer kit with ring and seal for spindle Ø 20mm

Reference: 4347

€19.00 (tax incl.)

In stock

Aluminum wedge on ORIGINAL front spring - Height: 16mm - 1

Aluminum wedge on ORIGINAL front spring - Height: 16mm - 1

Aluminum wedge on ORIGINAL front spring - Height: 16mm

Designed to be mounted only with the original springs (wire Ø 12.5mm). Sold individually.

Reference: 4380

€39.00 (tax incl.)

Out of stock

Aluminum spacer on AVP front spring - height 16mm - 1

Aluminum spacer on AVP front spring - height 16mm - 1

Aluminum spacer on AVP front spring - height 16mm

Designed to be mounted only with AVP springs: ref 4360, ref 4361 or ref 4362.

Reference: 4368

€39.00 (tax incl.)

In stock

Front spring - Height 240mm - 1

Front spring - Height 240mm - 1

Front spring - Height 240mm

Reference: 4360

€92.00 (tax incl.)

In stock

Front spring - Height 225mm (original dimension) - 1

Front spring - Height 225mm (original dimension) - 1

Front spring - Height 225mm (original dimension)

Reference: 4361

€92.00 (tax incl.)

In stock

Front Spring - Height 210mm - 1

Front Spring - Height 210mm - 1

Front Spring - Height 210mm

Reference: 4362

€92.00 (tax incl.)

In stock

Rubber washer under front spring - ref 6071865 - 1

Rubber washer under front spring - ref 6071865 - 1

Rubber washer under front spring - ref 6071865

Reference: 4355

€3.00 (tax incl.)

In stock

Original pedal pad - ref 06006090800 - 1

Original pedal pad - ref 06006090800 - 1

Original pedal pad - ref 06006090800

Reference: 4366

€4.00 (tax incl.)

In stock

Kit of 2 nylon pedal axle rings - ref 0604661400 - 1

Kit of 2 nylon pedal axle rings - ref 0604661400 - 1

Kit of 2 nylon pedal axle rings - ref 0604661400

Reference: 4365

€9.00 (tax incl.)

In stock

Bronze / PTFE (Teflon) pedal axle ring - ref 0604661400 - 1

Bronze / PTFE (Teflon) pedal axle ring - ref 0604661400 - 1

Pedal shaft bronze / PTFE (Teflon) ring - ref 0604661400

Maintenance-free ring

Reference: 4399

€8.00 (tax incl.)

In stock

Kit of 2 pedal springs (clutch and brake)

Kit of 2 pedal springs (clutch and brake)

Kit of 2 pedal springs (clutch and brake)

Reference: 4367

€8.00 (tax incl.)

In stock

Pedal spring hanger - ref 0604582900 - 1

Pedal spring hanger - ref 0604582900 - 1

Pedal spring hanger - ref 0604582900

Reference: 4114

€1.00 (tax incl.)

In stock

Throttle and clutch cable clevis pin - 1

Throttle and clutch cable clevis pin - 1

Throttle and clutch cable clevis pin

Useful length 11.5mm (Rating L) ref 0705339100 Sold with pin

Reference: 4369

€2.00 (tax incl.)

In stock

Clutch cable clevis pin - 2

Clutch cable clevis pin - 2

Clutch cable clevis pin

Useful length 18mm (Rating L) ref 0705322000 Sold with pin

Reference: 4370

€2.00 (tax incl.)

In stock

Brake pedal return spring clevis pin - 2

Brake pedal return spring clevis pin - 2

Brake pedal return spring clevis pin

Useful length 15.50mm (Rating L) ref 0705837200 Sold with pin

Reference: 4371

€2.00 (tax incl.)

In stock

Eye split pin for clevis pin - Ø 2mm

Eye split pin for clevis pin - Ø 2mm

Eye split pin for clevis pin - Ø 2mm

Reference: 4394

€0.20 (tax incl.)

In stock

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - ref 05 54 732 800

Reference: 4386

€5.00 (tax incl.)

In stock

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Wheel nut for original steel rim - M12x125 - ref 0823676600

Reference: 4327

€3.00 (tax incl.)

In stock

Hex wheel nut chromed steel - 90° cone - M12x125

Hex wheel nut chromed steel - 90° cone - M12x125

Hex wheel nut chromed steel - 90° cone - M12x125

Reference: 4328

€6.50 (tax incl.)

In stock

Hex wheel nut chromed steel - 60° cone - M12x125

Hex wheel nut chromed steel - 60° cone - M12x125

Hex wheel nut chromed steel - 60° cone - M12x125

Reference: 4329

€6.50 (tax incl.)

In stock

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900 - 1

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900 - 1

Shock absorber support - R8G and A110 (1300 / 1600VC) - ref 0833090900

Reference: 4353

€34.00 (tax incl.)

Out of stock

Front shock absorber mounting short bolt Ø 9 - ref 0605386200 - 1

Front shock absorber mounting short bolt Ø 9 - ref 0605386200 - 1

Front shock absorber mounting short bolt Ø 9 - ref 0605386200

Reference: 4354

€4.50 (tax incl.)

In stock

Pair of front shock absorbers - standard - R8 G (from 10/1964 to 1974) - R1134/1135 - Alpine A110 (all models) - Matradjet (fron

Pair of front shock absorbers - standard - R8 G (from 10/1964 to 1974) - R1134/1135 - Alpine A110 (all models) - Matradjet (fron

Pair of "Standard Calibrated" front shock absorbers - R8.G / Alpine A110 (all models)

Suitable for: - R8.G (R1134 / R1135) from 10/1964 to 1974 - Alpine A110: 1100cc / 1300cc / 1600cc / SC and SX (with Alpine A310 rear axle) - Alpine GT4 / Matradjet

Reference: 4358

€160.00 (tax incl.)

In stock

Showing 1-64 of 77 item(s)

1

Left column

Top

Please sign in first.

Sign in