Outside diameter: 260mm Hub passage diameter: 60mm Distance between the 3 fixing holes: 71mm Thickness: 8mm
In stock
Braking R8 / R8S / R8G
Our braking spare parts for the Renault R8 / R8S / R8G
Discover here a wide choice of parts to restore and ensure the proper functioning of the braking system of your Renault R8 / R8S / R8 Gordini.
Whether you are looking for wheel cylinders, hoses, master cylinders, brake discs, original brake calipers, big brake calipers, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old one back to life with quality components.
In stock
In stock
In stock
Suitable for front or rear (need 2 sets for one car)
Competition type pads, efficient in cold and high temperatures,
Friction coefficient of 0.43 µ,
Use reserved for competition, do not use these pads on public...
In stock
End cap for stop switch Ø 12.5mm
Mounting using a long rod
In stock
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 77mm / max 87mm
In stock
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 105mm / max 115mm
In stock
Master Cylinder Side (Male Thread): M16x150
Copper Pipe Fitting Side (Female Thread): 1/2"-20 UNF
In stock
In stock
Thread (master cylinder side): M16x150
Nozzle (rubber hose connection side): Ø 10mm
In stock
In stock
Mounts with the stop switch reference 4423
In stock
Female connection: Ø 3/8" - 24UNF (x3)
Mounts with reference 4423.
In stock
Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
In stock
In stock
Out of stock
In stock
Length 1 meter
In stock
In stock
In stock
In stock
The entire kit is made up of 3/8"-24UNF fittings
This kit is composed of the following copper pipes:
- From the brake master cylinder to the Right Front Wheel
- From the brake master cylinder to the Left Front Wheel
-...
Out of stock
In stock
In stock
Fully open position, release pressure 8 bars (+/- 5bars)
In stock
In stock
In stock
In stock
Suitable for:
- 4CV: Drum brake (From 06/1953 until end of series)
- Dauphine (All models): Disc brake
- Caravelle / Florida: Disc brake
- R10 / R8 (All models): Disc brake
- Alpine A110 and GT4: Disc brake
-...
Out of stock
Suitable for:
4CV: Drum brake (From 06/1953 until end of series)
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brak
Out of stock
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brake
Matradjet:...
Out of stock
The bracket is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S
In stock
The bracket is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S
In stock
Sold without adjustment screw or handbrake lever
The yoke is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S / Matradjet
In stock
Sold without adjustment screw or handbrake lever
The yoke is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S / Matradjet
In stock
In stock
In stock
In stock
In stock
