Lugs on straight reel
4 spark plug wires + 1 coil wire
Coil cable length: 61cm
Length of the 2 candle cables: 26.5cm
Length of the 2 candle cables: 36.5cm
Out of stock
Alpine A310.4 Engine and Transmission Performance
Our performance and Racing spare parts for your Alpine A310.4
Discover here a wide selection of parts and accessories designed to improve and boost the performance of your Alpine A310.4 1108cm³ engine or your Alpine A310.4 1255cm³ engine.
Whether you are looking for an aluminum crankshaft pulley, aluminum rocker cover, oil pump, push rod, oil filter connector for oil cooler or even a water pump pulley, high flow water pump, racing clutch kit, aluminum pipe for weber carburetor, carburetor flange, green air filter, distributor, electronic ignition kit...at AVP, Arnaud Ventoux Pièces, you will find everything you need to optimize the operation of your old one with quality components.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF / female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
Sold with x1 plug, x1 cardboard seal and x4 spark plug well seals
In stock
In stock
In stock
In stock
In stock
Flow rate: 120l/h
Max pressure: 0.25bar
Tube: Ø8mm
Self-regulating fuel pump
In stock
Flow rate: 130l/h
Max pressure: 0.15bar
Suction: -0.20bar
Inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm / weight 820g
Ideal for prepared engines or to replace a mechanical fuel pump.
In stock
In stock
Delivered with these O-rings (x4) and these paper seals (x4)
In stock
In stock
Mounting with a pair of aluminum flange ref: AVP6810
Out of stock
In stock
In stock
In stock
In stock
- Lugs on coil angled at 90°
- 4 spark plug wires + 1 coil wire
- Coil cable length: 61cm
- Length of the 2 spark plug cables: 26.5cm
- Length of the 2 candle cables: 36.5cm
Out of stock
- Lugs on coil angled at 90°
- 4 spark plug wires + 1 coil wire
- Coil cable length: 61cm
- Length of the 2 spark plug cables: 26.5cm
- Length of the 2 candle cables: 36.5cm
Out of stock
- Straight reel lugs
- 4 spark plug wires + 1 coil wire
- Coil cable length: 61cm
- Length of the 2 spark plug cables: 26.5cm
- Length of the 2 candle cables: 36.5cm
Out of stock
This lighter is suitable for:
- R12.G / A310.4 (1605cc)
Igniter to be used with a primary resistance coil between 2.5 and 3.5 ohms,
Compatible with AVP4708 and AVP4715 coils,
In stock
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm
Supplied with 3...
In stock
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm
Supplied with 3...
In stock
In stock
In stock
In stock
In stock
In stock