Outside diameter: 260mm Hub passage diameter: 60mm Distance between the 3 fixing holes: 71mm Thickness: 8mm
In stock
Alpine A110 braking
Our braking spare parts for the Alpine A110
Discover here a wide range of parts to restore and ensure the proper functioning of the braking system of your Alpine A110
Whether you are looking for wheel cylinders, hoses, master cylinder, brake disc, pad, brake caliper kit, big brake caliper, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Parts, you will find everything you need to bring your old car back to life with quality components.
In stock
In stock
In stock
Suitable for front or rear (need 2 sets for one car)
Competition type pads, efficient in cold and high temperatures,
Friction coefficient of 0.43 µ,
Use reserved for competition, do not use these pads on public...
In stock
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 77mm / max 87mm
In stock
Mounts with the stop switch reference 4423
In stock
In stock
Come with x3 aviation brake hoses to replace copper pipes
Out of stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 105mm / max 115mm
In stock
For original master cylinder Ø19mm, Ø22mm and Kangoo assembly
In stock
Master Cylinder Side (Male Thread): M16x150
Copper Pipe Fitting Side (Female Thread): 1/2"-20 UNF
In stock
In stock
Thread (master cylinder side): M16x150
Nozzle (rubber hose connection side): Ø 10mm
In stock
In stock
- Sold complete with support, brass cap, insert and rubber teat - Jar mounted with rubber teat Ø 6mm
In stock
Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
In stock
In stock
In stock
Length 1 meter
In stock
In stock
In stock
In stock
The entire kit is made up of 3/8" -24UNF fittings
This kit is made up of the following copper pipes:
- from the brake master cylinder to the Front Right wheel
- from the brake master cylinder to the Front Left wheel
-...
In stock
This kit is made up of the following copper pipes:
- from the brake master cylinder to the pressure drop indicator (1/2"-20UNF connection)
- from the brake master cylinder to the pressure drop indicator (3/8"-24UNF...
In stock
In stock
In stock
In stock
Fully open position, release pressure 8 bars (+/- 5bars)
In stock
Suitable for:
- 4CV: Drum brake (From 06/1953 until end of series)
- Dauphine (All models): Disc brake
- Caravelle / Florida: Disc brake
- R10 / R8 (All models): Disc brake
- Alpine A110 and GT4: Disc brake
-...
In stock
Suitable for:
4CV: Drum brake (From 06/1953 until end of series)
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brak
In stock
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brake
Matradjet:...
In stock
The bracket is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S
In stock
The bracket is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S
In stock
Sold without adjustment screw or handbrake lever
The yoke is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S / Matradjet
In stock
Sold without adjustment screw or handbrake lever
The yoke is equipped with a square seal.
It mounts on:
Dauphine disc brakes
A110 small brakes
R8/ Caravelle / Floride S / Matradjet
In stock
In stock
In stock
In stock
In stock
In stock